Jintai_logo
Jintai_extruded_honeycomb_ceramic_foundry_filter Jintai_infrared_ceramic_tile Jintai_alumina_ceramic_foam_filter Jintai_high_efficiency_tower_packing
Home Contact JINTAI Organization Qualification Sitemaps
Product List

   Tower Packing>>Structured Packing>>Metal Structured Packing                          Sales: Biz@jintai-group.cn

Metal Structured Packing 

Product No: JT-MSP 

Metal structured packingmetal structral packingmetal structured packing

JINTAI Metal Corrugated Structured Packing:

      JINTAI Metal Corrugated Structured Packing is constructed of sheets of corrugated metal. The angle of inclination of the corrugations of adjacent sheets is reversed with respect to the vertical column axis, forming mixing cells at every point where the corrugations intersect. Perforations and surface texturing, including waffled, grooved and smooth, promote intimate mixing and radial distribution over the entire tower cross-section. Each subsequent element is rotated 90 degree about the column axis so that the sheets of one element are perpendicular to the sheets of the elements above and below. In passing through each element, gas and liquid are thoroughly mixed in the direction parallel to the plane of the sheets. By rotating subsequent elements, excellent mixing and spreading, both side-to-side and front-to-back are obtained over the entire cross-section of the tower. JINTAI Metal Corrugated Structured Packing operates over a wide range of liquid and gas rates. With more than 10 types of JINTAI Corrugated Packing available, JINTAI can provide the right products to meet your specific tower requirements.

        JINTAI Metal Corrugated Structured Packing offers higher capacity and/or higher efficiency than random packing or conventional trays.  JINTAI Metal Corrugated Structured Packing revamp can increase separation efficiency, increase capacity, lower pressure drop, and often significantly lower the energy costs of distillation and absorption operations. That means retrofitting existing packed or trayed towers with JINTAI Metal Corrugated Structured Packing will improve profitability.  

Application:

      JINTAI Metal Corrugated Structured Packing widely used in temperature sensitive application where large numbers of theoretical stages are needed. Low liquid loading systems for vacuum distillations or organic intermediates, amines, glycols, fatty acids, essential oils and fragrances, suitable for solvent recovery, batch & continuous distillation system and system of ethyl benzene / benzene second, hexamethylene kelone/ hexamethylene mellow, oneself lactam. Absorb or regeneration tower.

Materials: Stainless steel, Carbon steel, aluminum, bronze and special alloys.

Properties:

Model

surface area
α
m 2 /m 3

void space

ε 

m 3 /m 3

Waterpower Diameter
de
mm

Declined angle degree

F-factor
m/s kg/m 3

Theoretical tower plate No/m

125 x/y

125

98.5

18

30/45

3

1-1.2

250 x/y

250

97

15.8

30/45

2.6

2-3

350 x/y

350

96

11.5

30/45

/ /

450 x/y

450

93

9

30/45

1.5

3-4

500 x/y

500

93

8

30/45

/ /

 

JINTAI Metal Wire Mesh Structured Packing

        JINTAI Metal Wire Mesh structured columns packing consist of proprietary designed metal wire mesh with corrugated sheets which are aligned and placed vertically. The wire structures slopes are reversed in other sheets stacked with alternating 90 degree orientation of each layer resulting in inclined flow passages and a relatively high surface area. This allow thin liquid films to be continuously spread across the tower as liquid flows through the packing. Capillary action and high surface areas result in maximum exposure to high mass transfer efficiency.

Features

u  Good lateral distribution of liquid and gas.

u  Highest theoretical stages per meter of packed height.

u  Lower specific pressure drop per theoretical stage.

u  Less liquid hold up. Economic operating loads.

u  The weir mesh packing with high number of theoretical plates and low pressure drop per meter.

u  Small hold-up, most economical load range: F factor 1.5—2m/s kg/m3. minimum liquid load approx: 0.2 m3/m2·h

Materials: Stainless steel, Carbon steel, aluminum, bronze and special alloys.

Applications:

Fine Chemicals, Flavours, Isomers Separation. The separation of thermal sensitive materials, Pilot and laboratory columns. Reform existing columns for increased Performance.and system of ethylbenzene / benzene second, hexamethylene kelone/ hexamethylene mellow, oneself lactam. absorb or regeneration tower.

Specific surface area
α
m2/m3

Void
ε
%

Waterpower diameter
de
mm

Declined angle degree

Heaping Weight
γρ
kg/m3

F-factor m3

Theoretical tower plate Number No/m

500

0.91

7.5

30

250

2.4-1.3

4-5

700

0.90

5

45

350

2.4-2.0

6-10

 

You might have Interest in the following JINTAI TOWER PACKING Product:

CERAMIC RANDOM PACKING        PLASTIC RANDOM PACKING         

METAL RANDOM PACKING             STRUCTURED PACKING

JINTAI Ceramic Structured Packing JINTAI Ceramic Structured Packing JINTAI Plastic Structured Packing JINTAI Metal Structured Packing JINTAI Metal Structured Packing JINTAI Structured Tower Packing 
JINTAI Ceramic Pall Ring JINTAI Pall Ring JINTAI Plastic Pall Ring JINTAI Metal Pall Ring JINTAI Metal Pall Ring JINTAI Pall Ring Packing 
JINTAI Ceramic Raschig Ring JINTAI Ceramic Raschig Ring JINTAI Metal Rachig Ring JINTAI Metal Raschig Ring JINTAI Metal Super Raschig Ring JINTAI Raschig Ring Packing 
JINTAI Ceramic Intalox Saddles JINTAI Ceramic Super Intalox Saddles JINTAI Metal Intalox Saddle Ring JINTAI Plastic Intalox Saddle Ring JINTAI Plastic Super Saddle Ring JINTAI Saddle Ring Packing 
JINTAI Ceramic Cascade Mini Ring Packing JINTAI Plastic Cascade Mini Ring Packing JINTAI Plastic Cascade Mini Ring JINTAI Metal Cascade Mini Ring JINTAI Metal Cascade Mini Ring JINTAI Cascade Mini Ring Packing 
JINTAI Metal Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Ceramic Rosette Ring JINTAI Tellerette Rosette Ring Packing 
Alumina Ball Inert Ceramic Ball Inert CERAMIC BALL Alumina Ball Alumina Ball JINTAI Catalyst Support Media 
    
-Ceramic Foam Filter-

Alumina Ceramic Foam Filter
SiC Ceramic Foam Filter
Zirconia Ceramic Foam Filter


-Tower Packing-

Ceramic Random Packing
Metal Random Packing
Plastic Random Packing
Structured Packing


-Ceramic Honeycombs-

Infrared Ceramic Tile
Ceramic Honeycomb Substrate
RTO Honeycomb Ceramic
Diesel Particulate Filter
Honeycomb Foundry Filter


-Others-

Chromium Metal
Alloying Tablets
Titanium Sponge
Molecular Sieves
Acid Resistant Ceramic
Inert Alumina Ceramic Balls


-Product Navigation-

Product Photo Gallery
Product Application

 

CopyRight © 2005 Jiangxi Jintai Special Material LLC. All Rights Reserved

 
 Tel: +86-799-6818111
              E-Mail: biz@jintai-group.cn                    Web: www.ceramic-honeycombs.com
Address: Room1008, Heng Long International Building, No.93 Yue Jin South Road, PingXiang, JiangXi 337000, China